I’ve got about 3 days worth of androsol left in my bottle, but it is near the bottom and it is getting hard to spray. It’s ok if the bottle is held perfectly upright, so I’ve had to get creative to hold the bottle that way while I spray. Any suggestions for getting the last little bit out? Can I dilute it with anything? Any other thoughts, because I can’t be the only one who has had this problem?
It’s how you angle it. There is a tube that runs from the pump down to the edge of the bottom. If you angle the liquid away from the opening of the tube, nothing will come out. You can tilt it so that it pools at the entrance of the tube, and you’ll get every last drop.
Buy a new bottle and pour it into there. That’s what I always do.
After i got to the bottom, and couldnt’ get anymore out from the angle-spraying, i just unscrewed the top and poured the little bit that was left on me. You can get most of it out though by just tilting it towards the bottom part of the sprayer in the bottle.
Thanks guys. That was the response I pretty much expected. I sure wish I had another bottle to pour the residual into, but I don’t so I will just try to squeeze out the last little bit as best as I can.