I have read how using ethyl oleate, it is possible to create a higher concentrated product without that extra sting.
I am a big fan of fast acting injects and will continually be running two to three of them at one time. That being said, I thought that if I could make it so I only had to do .5ml of test and still get 100mg/day it would make pinning a lot easier. Soooo is this possible or is 200mg too concentrated even with the EO?
Also, if one wanted to pm me a place to get EO for a good price, I would be appreciative = ).
I have never home brewed but I did try test prop in EO at 200mg/ml from a ugl. It is a good source and I have used their enanthate and cypionate before without problems.
But, when I used the prop I was crippled! This could be due to the EO though. My body does not seem to react well to it at all.
Have you used EO based AAS before? Also what will the BA and BB be?
I dont think it should be a big deal with the EO. I know a lot of people who use it and love it because you can do fewer injections due to the fact that it can be dosed higher.
You’ll know if you dont react well to it withing about 12 hours or less of taking it. The area will be really painful, possibly red and swollen. Might also get a fever. These are all sides I get from EO. Hopefully it will go better for you! Hope I’m not scaring you away from it lol
Well I def dont want to make 10g of prop suspended in an oil that causes an allergic reaction, maybe ill make a sample to make sure first. thanks Juice
[quote]soontobeIFBB wrote:
Well I def dont want to make 10g of prop suspended in an oil that causes an allergic reaction, maybe ill make a sample to make sure first. thanks Juice[/quote]
I would definately recommend it bro! Trust me the reaction can be very bad. Within 12 hours of shooting the prop my right quad was 1 inch larger than it was at that time and my fever was up to 105. My gf helped me into a cold bath and I took a bunch of tylenol and it went down. Again though I had no way of telling but I had to find out.
Let me know how it goes. As I’ve said I know many guys who love EO based AAS.
It had nothing to do with the carrier that caused the problems with your injection. It was the fact that the prop was in fact 200mg/ml.
Stick to whats tried true and proven at 100mg/ml and you will avoid those issues.
If you want inject less total volume you would be better off making a blend of two different products giving you an overall concentration of 150mg/ml or something along those lines.
ex 100mg prop and 50 mg mast per ml
[quote]LillGuy001 wrote:
It had nothing to do with the carrier that caused the problems with your injection. It was the fact that the prop was in fact 200mg/ml.
Stick to whats tried true and proven at 100mg/ml and you will avoid those issues.
If you want inject less total volume you would be better off making a blend of two different products giving you an overall concentration of 150mg/ml or something along those lines.
ex 100mg prop and 50 mg mast per ml
[/quote]
I also believed this at first. But, for the cycle I am currently on I had test based in EO as well. It was dosed higher than normal as well, 400mg/ml and it caused the same problems. So I cut the test with sterile oil down to 250mg/ml and experienced the same problems. So I cut it even further all the way down to 125mg/ml just to see if I would still react the same and I did.
I have since got oil based test at 250mg/ml and it is like every other test I have run, virtually painless.