Bought British Dragon. Is It Real?

[quote]bushidobadboy wrote:
Actually, you have a good point.

You’ll maybe notice that I’m not one of those who flames source posting, but then I live outside the United States of Paranoia.

Now I’m not saying it’s right or wrong to openly post sources, but this one does seem to have escaped the ‘nay-sayers’.

I can see both sides of the argument actually. But why can’t newbies at least be steered in the right direction. It doesn’t seem right that someone should have to lose money to scammers just to prove themselves worthy of finding a reliable source.
By the way, I’m a proud owner of some of those little pink BD tabs, is there any way besides eating them to tell if they’re any good?

[quote]bushidobadboy wrote:
mojodaddyrat wrote:
bushidobadboy wrote:
Actually, you have a good point.

You’ll maybe notice that I’m not one of those who flames source posting, but then I live outside the United States of Paranoia.

Now I’m not saying it’s right or wrong to openly post sources, but this one does seem to have escaped the ‘nay-sayers’.

I can see both sides of the argument actually. But why can’t newbies at least be steered in the right direction. It doesn’t seem right that someone should have to lose money to scammers just to prove themselves worthy of finding a reliable source.
By the way, I’m a proud owner of some of those little pink BD tabs, is there any way besides eating them to tell if they’re any good?

Since BD are a bit sketchy right now, I would view any ‘BD’ product as a little bit suspect.

Besides actually testing them in a lab, you could inspect the tablets for quality of manufacture. How well made are they? Do the edges crumble away under a probing fingernail, or are they quite straight and solid? If you snap one down the dividing line, does it break sharply and neatly, or does it fall apart, leaving erratic edges and different sized ‘halfs’.

Squash one between a worktop and the bottom of a glass. How crumbly is it? Does it require force to break the tab down, or does the thing just immediately squash flat into fine powder?

I think Bill Roberts mentioned something about using acetone to dissolve the hormone yet leave the filler. You then evaporate the acetone and measure the residue, to see what % is hormone and what % is filler.

I may not have got that right though, plus you’d need to dissolve a lot of tabs and have some pretty accurate scales.

However, you could use any left over acetone to wash up cocaine into rocks - bonus! Kidding, of course…

Bushy[/quote]

BD, is way to risky to even buy, having it tested buy a lab is expensive, why go through all that bullshit, unless your buyin in bulk and if thats the case youve already been screwed, any legit source that had it, has stopped selling it. There are scammers that scam newbies because BD, years ago was the way to go, There are to many suppliers out there that are legit. You just have to be patient, and do research.

[quote]bushidobadboy wrote:
SPANISH FLY wrote:
bushidobadboy wrote:
mojodaddyrat wrote:
bushidobadboy wrote:
Actually, you have a good point.

You’ll maybe notice that I’m not one of those who flames source posting, but then I live outside the United States of Paranoia.

Now I’m not saying it’s right or wrong to openly post sources, but this one does seem to have escaped the ‘nay-sayers’.

I can see both sides of the argument actually. But why can’t newbies at least be steered in the right direction. It doesn’t seem right that someone should have to lose money to scammers just to prove themselves worthy of finding a reliable source.
By the way, I’m a proud owner of some of those little pink BD tabs, is there any way besides eating them to tell if they’re any good?

Since BD are a bit sketchy right now, I would view any ‘BD’ product as a little bit suspect.

Besides actually testing them in a lab, you could inspect the tablets for quality of manufacture. How well made are they? Do the edges crumble away under a probing fingernail, or are they quite straight and solid? If you snap one down the dividing line, does it break sharply and neatly, or does it fall apart, leaving erratic edges and different sized ‘halfs’.

Squash one between a worktop and the bottom of a glass. How crumbly is it? Does it require force to break the tab down, or does the thing just immediately squash flat into fine powder?

I think Bill Roberts mentioned something about using acetone to dissolve the hormone yet leave the filler. You then evaporate the acetone and measure the residue, to see what % is hormone and what % is filler.

I may not have got that right though, plus you’d need to dissolve a lot of tabs and have some pretty accurate scales.

However, you could use any left over acetone to wash up cocaine into rocks - bonus! Kidding, of course…

Bushy

BD, is way to risky to even buy, having it tested buy a lab is expensive, why go through all that bullshit, unless your buyin in bulk and if thats the case youve already been screwed, any legit source that had it, has stopped selling it. There are scammers that scam newbies because BD, years ago was the way to go, There are to many suppliers out there that are legit. You just have to be patient, and do research.

All very true. however the question was asked “how can I test my tablets”. It sounds like the poster has already got his.

Personally, I wouldn’t buy anything that was supposed to be BD, but it sounds like mojo already has…[/quote]

True, Im just tryin to keep people aware of my experiences with certain labs. Question, most if not all the forums im on or have been on you cant mention UGL names, that dosent seem to be a problem here, ive read most the rules, is it ok to mention lab names ??

[quote]bushidobadboy wrote:
Personally, I wouldn’t buy anything that was supposed to be BD, but it sounds like mojo already has…[/quote]

Exactimundo Bushy…ordered them before I knew BD had gone under. I’ll probably buy it on paper if this stuff is junk.

What do you guys think of the Russian and Romanian versions of D-bol?

[quote]bushidobadboy wrote:

Since BD are a bit sketchy right now, I would view any ‘BD’ product as a little bit suspect.

Besides actually testing them in a lab, you could inspect the tablets for quality of manufacture. How well made are they? Do the edges crumble away under a probing fingernail, or are they quite straight and solid? If you snap one down the dividing line, does it break sharply and neatly, or does it fall apart, leaving erratic edges and different sized ‘halfs’.

Squash one between a worktop and the bottom of a glass. How crumbly is it? Does it require force to break the tab down, or does the thing just immediately squash flat into fine powder?

I think Bill Roberts mentioned something about using acetone to dissolve the hormone yet leave the filler. You then evaporate the acetone and measure the residue, to see what % is hormone and what % is filler.

I may not have got that right though, plus you’d need to dissolve a lot of tabs and have some pretty accurate scales.

However, you could use any left over acetone to wash up cocaine into rocks - bonus! Kidding, of course…

Bushy[/quote]

They break pretty evenly, but also seem crumbly. Guess I’ll have to find out the old fashioned way. They also came with one of those little desicant pouches that had the BD logo on it, but I don’t suppose that would be too hard to fake.

Great info Bushy…many thanks.

Okay guys I have a few questions since I am a newbie…

  1. What is the problem with revealing the sorce of where you purchase your product if you purchase it from a site that is overseas? (It’s not like I’m exposing the guy at the gym who sells steroids) Big difference.

  2. A part of doing research is researching the products yes but also questioning people who have experience using specific products. What is the big deal with people on here saying to “Do more Research” instead of just helping newbie’s out and giving them advise that they can actually use.

  3. Furthermore, according to my source BD onlyt quit producing in 2006 due to some contaminated products. However, in the 2007 year they claim to be producing. I have been taking the Winnie like I said earlier and I have noticed substantial strength increases in a week and a half.

And to those of you who have offered your honest advice and opinions, Thanks!!!

  1. Any unnecessary exposure is just that, unnecessary. Throwing the name of the sources out more and more raises the likelyhood that it can fall into the wrong hands and, next thing you know, certain shipping addresses from overseas are red flagged and fall victim to customs. Not to mention the possible cooperation between two government agencies in shutting down underground labs.

  2. The problem isn’t so much asking for help on specific questions, but in asking so broad a question that it becomes evident that the user doesn’t have more than a few minutes of research time under his belt. There’s a major difference in asking “What’s the half-life of ___ and how should I split the dosage?” than in asking “I just bought some ______. How do I use it? How much do I take?”

Also some other members might feel as I do in saying that the more accessible cycle information becomes, the less likely a newbie is to do important research (namely side-effects, PCT, etc) on his own. Ultimately you want to learn about what you’re putting into your body. Not just run through the motions because some guy online told you so.

  1. British Dragon has been shut down since December of 2006. That’s their own word, and thus, not subject to debate. Be weary of anyone who tells you otherwise.